GRACO 17J703 - Kit, Applicator, Ball, Valve, 1"
Specifications
- Inside Diameter: 1 in.
- Length: 25 ft
- Hose Part Number: 88
Compatible Equipment
Related Parts
Additional accessory kit that can be installed on the end of the 1 in. ID, 25 ft material hose (88) directly between the pole spray applicator pipe handle and adapter fitting. The applicator ball valve (1, 2) can be used to stop material flow, but not only after the pump has been stopped first. Do NOT use the valve to stall the pump. Used to stall the pump - NOTE: If the applicator ball valve kit (17J703) has been installed, do NOT use the valve to stall the pump. The pump must be stopped first before the ball valve can be closed. Referenced in step 4 of Pressure Relief Procedure: 'If the applicator ball valve kit (17J703) has been installed, open the ball valve.' This kit is used as part of the pressure relief system for the spraying equipment.
Reference Manuals
- 3A3109 (Page 2) ToughTek F340e Portable Fireproofing Pump
- 3A3110 (Page 2) ToughTek F680e Fireproofing Pump
- 3A6393 (Page 2) ToughTek F340e Portable Fireproofing Pump, Operation, Repair, and Parts
