GRACO 238143 - Ball GRACO 238143 Valve, 316Ss, 3/8 Tube Fitting x 3/8 NPSM(M), 500 PSI (35 Bar

Specifications

• Thread: 3/8 tube fitting x 3/8 npsm(m)
• Max Working Pressure: 500 psi (35 bar, 3.5 MPa) Maximum Fluid Working Pressure
• Material: 316 Series Stainless Steel
• Series: B
• Cavity Type: Closed Cavity
• Fitting Standard: npsm threaded ends meet SAE J516 fitting recommendations
• L1 Recommended Straight Length: 15/16"
• L2 Absolute Minimum Straight Length: 3/4"
• Connection Type: compression nut one end, threaded other end
• Includes Jam Nut: yes for panel mounting

Compatible Equipment

• carbon steel tubing ASTM A-179 or equivalent
• stainless steel tubing ASTM A-269, ASTM A-213 or equivalent
• Models 237536 through 237542 and 238143 - Ball GRACO 238143 Valve, 316Ss, 3/8 Tube Fitting x 3/8 NPSM(M), 500 PSI (35 Bar

Related Parts

• 237528 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 1/4" NPT(m) x 1/4" NPT(m)
• 237529 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 1/4" NPT(m) x 3/8" npsm(m)
• 237530 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" NPT(m) x 1/4" NPT(m)
• 237531 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" NPT(m) x 3/8" NPT(m)
• 237532 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" NPT(f) x 3/8" NPT(f)
• 237533 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" npsm(m) x 3/8" NPT(m)
• 237534 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" NPT(f) x 3/8" NPT(m)
• 237535 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" NPT(f) x 3/8" npsm(m)
• 237537 - Low Pressure Ball Valve Compatible w/ stainless steel, Catalyst & Waterborne Materials, 3/8" OD Tube x 3/8" OD Tube

Part of the 316 Series low-pressure ball valve family with closed cavity design Models 237541 and 238143 have compression nut on one end for connecting valve to tubing, threaded other end for pipe connection, and include jam nut for panel mounting. Valve ships fully assembled with compression nut finger tight. Do not disassemble before installing. This ball valve follows the installation procedure for models 237536 through 237542 and 238143 only. Uses 3/8 in. O.D. tube end and compression fitting installation method. Has Canadian Registration Numbers - Alberta: 0C4155.2, Ontario: 0C4874.5

Reference Manuals

• 307628 (Page 1) Low-Pressure Ball Valves and