GRACO V25FT000BB - iQ Dispense Valve, Tip-Seal, Heated, 0.051in Tip, 0in Nozzle, Direct Mount Solenoid, 4000 PSI
The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.
Additional Specifications
- Max Working Pressure: 4000 PSI (28 MPa, 276 bar) Maximum Working Pressure; 120 PSI (0.8 MPa, 8.3 bar) Maximum Air Pressure
Specifications
| Air Inlet Size (in) | 5/16 |
| Air Inlet Thread Type | Push-to-Connect |
| Ambient/Warm Melt/Hot Melt | Warm Melt |
| Applicator Type | Tip-Seal |
| Component Type | Single Component |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Gun Activation | Automatic |
| Maximum Air Pressure (MPa) | 0.83 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Fluid Pressure (MPa) | 28 |
| Maximum Fluid Pressure (psi) | 4000 |
| Maximum Operating Temperature (°F) | 158 |
| Mount Location | Direct Mount Solenoid |
| Nozzle Size (in) | 0.051 |
| Outlet Block Length (in) | NA |
| Phase | 1 |
| Power Rating (W) | 100 |
| RTD Type | 100 OHM - Platinum |
| Solenoid Valve Voltage Rating (V dc) | 24 |
| Type | Dispense Valve |
| Voltage (V ac) | 240 |
| Weight (lb) | 1.9 |
| Wetted Material | Aluminum, UHMWPE, 17-4 Stainless Steel, PEEK, Chemical Resistant O-Rings, CA 360 Brass, Coated Tool Steel, 440C Stainless Steel |
Compatible Equipment
- adhesives
- sealants
- and other materials that are compatible with the wetted parts of the valve
Related Parts
Part of iQ Dispense Valves family. Not approved for use in explosive atmospheres or hazardous (classified) locations. See page 3 for model information (referenced but not shown on this page). This page shows component identification only. V25FT000BB is shown as the heated valve version, while V25AB000BA is the non-heated version. Detailed specifications not provided on this page.
Reference Manuals
- 333585 (Page 1) iQ Dispense Valves
