PALMGREN 9680222 30" Gear Head PwrFd Floor 4HP 230V 3PH
This very rugged drill press is the ideal choice for medium - to heavy duty - large hole making production and is built with performance features to withstand continuous industrial use. This drill is built to last even in the most adverse working conditions. Large heavy cast iron construction for maximum stability with all gear drive hardened and ground steel gears that operate in an oil bath with 18 speeds to choose from. Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, 6 spindle power feed rates with electromagnetic clutch, power feed is engaged by push button located in the three spoke hand feed lever. These drills can be used to perform all hole making operations - drilling, tapping, reaming, boring, spot facing, counter-boring and chamfering in any type of material.
- Tapping mode
- Built in halogen work light
- Hand wheel for fine feed of spindle
- Coolant system
- Electronic interlock spindle safety guard
- Automatic tool ejector
Specifications:
Model | 80222 |
---|
Motor HP | 3HP/4HP / 230V / 3PH |
---|
Spindle Speeds | 50 - 2090 RPM |
---|
Spindle Taper | MT4/JT3 |
---|
Drilling capacity in steel | Ø 50 mm / 2 in |
---|
Working Range | 375 mm / 14.75 in |
---|
T-slot size | 18 mm / 3/4 in |
---|
Distance spindle - table (max.) | 800 mm / 31-1/2 in |
---|
Working surface base L x W | 600 x 520 mm / 23-5/8 x 20-7/16 in |
---|
Distance spindle - base (max.) | 1300 mm / 51 in |
---|
Column Diameter | 200 mm / 7-7/8 in |
---|
Motor Coolant Pump | 40 W / .054 HP / 230V |
---|
Threading in Steel | M 42 / 1-5/8 in |
---|
Sleeve Travel | 230 mm / 9 in |
---|
Automatic Spindle Sleeve Feed | 6 steps, .002 / .012 in/rev |
---|
Number of Steps | 18 Steps |
---|
Height | 97 in |
---|
Width | 24 in |
---|
Depth | 44 in |
---|