Simpson Strong-Tie PAB4H-18 - 1/2 X 18In Atr W/1-1/2X1-1/2X3/8In Wash

The PAB anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer, at the embedded end, sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour.

Key Features

• Available in diameters from 1/2" to 1 1/4" and lengths from 12" to 36" (in 6" increments)
• Available in standard and high-strength steel
• Head stamp contains the No Equal sign, diameter designation and an "H" on high-strength rods

Material

• Standard Steel — ASTM F1554 Grade 36, A36 or A307; F_u = 58 ksi
• High-Strength Steel (up to 1" dia.) — ASTM A449; F_u = 120 ksi
• High-Strength Steel (1 1/8" and 1 1/4" dia.) – ASTM A193 B7 or F1554 Grade 105; F_u = 125 ksi

Finish

• None or HDG

Installation

• On HDG PABs, chase the threads to use standard nuts or couplers or use overtapped products in accordance with ASTM A563; for example, Simpson Strong-Tie^® NUT5/8-OST, NUT7/8-OST, CNW5/8-OST, CNW7/8-OST. Couplers may be special ordered with both ends oversized. Couplers may be oversized on both ends. Contact Simpson Strong-Tie.

Ordering Information

• When calling out PAB anchor bolts, substitute the desired length for the "XX" in the Root Model Number
• For a 5/8" x 18" anchor bolt, the model number would be PAB5-18 (or PAB5H-18 for high strength)