Tenryu PT-18540-T 7-1/4" Wood Blade 40T 5/8"Ko Arbor 0.063 Kerf 8300Rpm Circular
Features and Benefits:
Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
Aggressive rake angles for maximum cutting speed and efficiency.
Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
Can be resharpened for extended blade life.
Application: ULTRA-THIN blade for finish work on circular or trim saws.
Features:
Diameter: 7-1/4"
Teeth: 40
Arbor: 5/8"KO
Grind: ATB
Kerf: 0.063
Rake: 18
RPM: 8300